Cheapest Wash
Moderators: DasPhule, Moderators
-
- Posts: 67
- Joined: Mon Dec 06, 2010 7:44 pm
- Location: U.S.A.
Cheapest Wash
What recipe for a water based wash is the cheapest to make?
I am new to the modeling hobby and dont have a lot to spend.
I am new to the modeling hobby and dont have a lot to spend.
-
- Posts: 4098
- Joined: Fri Jul 12, 2002 6:50 pm
- Location: Elmwood Park, IL.
-
- Posts: 67
- Joined: Mon Dec 06, 2010 7:44 pm
- Location: U.S.A.
-
- Posts: 67
- Joined: Mon Dec 06, 2010 7:44 pm
- Location: U.S.A.
-
- Moderator
- Posts: 2463
- Joined: Sat Jul 13, 2002 4:42 pm
- Location: Back home in Cincy!
- Contact:
If you are going that route I would use acohol instead of soap. Sometimes using soap as a surfactent can cause bubbling when you apply the wash, just like soap bubbles in the sink. you might also look at thinning artists transparent inks they are not that expensive.hoth rebel wrote:So the apple barrel paint just needs to be thinned with water and a dop of dish soap right?
"Tell me and I forget. Teach me and I remember. Involve me and I learn."
- Benjamin Franklin
"I am recalibrating my lack of faith in humanity. I start by reading opinions on message boards…"
- Dogbert
"What is his Comprehension level? Are we talking Human, Squirrel or Anvil?"
- Dilbert
- Benjamin Franklin
"I am recalibrating my lack of faith in humanity. I start by reading opinions on message boards…"
- Dogbert
"What is his Comprehension level? Are we talking Human, Squirrel or Anvil?"
- Dilbert
-
- Posts: 67
- Joined: Mon Dec 06, 2010 7:44 pm
- Location: U.S.A.
-
- Moderator
- Posts: 2463
- Joined: Sat Jul 13, 2002 4:42 pm
- Location: Back home in Cincy!
- Contact:
I use Windsor and Newton oils. They have very fine grain, and for just washes a tube will last a very long time. I typically use either Ivory Black or Burnt Umber and mix it like 5 part turps to 1 part oil. So I use a pea size ball of the oil with say 1/4 to1/2 oz of turps. In fact I keep a glass bottle of each of my washes handy. They last a long time that way.
I also highly recommend putting a good coat of Future Floor wax on the piece you want to wash. Let the Future cure for at least 24hours before you apply the wash.
I also highly recommend putting a good coat of Future Floor wax on the piece you want to wash. Let the Future cure for at least 24hours before you apply the wash.
"Tell me and I forget. Teach me and I remember. Involve me and I learn."
- Benjamin Franklin
"I am recalibrating my lack of faith in humanity. I start by reading opinions on message boards…"
- Dogbert
"What is his Comprehension level? Are we talking Human, Squirrel or Anvil?"
- Dilbert
- Benjamin Franklin
"I am recalibrating my lack of faith in humanity. I start by reading opinions on message boards…"
- Dogbert
"What is his Comprehension level? Are we talking Human, Squirrel or Anvil?"
- Dilbert
-
- Posts: 3925
- Joined: Thu Apr 17, 2003 11:05 am
- Location: Aberdeen, Scotland
Dishwasher Rinse Aid is a good non-bubbly alternative to soap.Mark Yungblut wrote:If you are going that route I would use acohol instead of soap. Sometimes using soap as a surfactent can cause bubbling when you apply the wash, just like soap bubbles in the sink. you might also look at thinning artists transparent inks they are not that expensive.hoth rebel wrote:So the apple barrel paint just needs to be thinned with water and a dop of dish soap right?
"I'd just like to say that building large smooth-skinned models should be avoided at all costs. I now see why people want to stick kit-parts all over their designs as it covers up a lot of problems." - David Sisson