shooting fingernail polish through an airbrush

This is the place to get answers about painting, weathering and other aspects of finishing a model.

Moderators: DasPhule, Moderators

Post Reply
User avatar
raser13
Posts: 3515
Joined: Sat Nov 24, 2007 3:55 am
Location: second star to the left and straight on till mourning. other wise known as st. louis,mo

shooting fingernail polish through an airbrush

Post by raser13 »

hey guys i was stuck in the finger nail polish isle with my wife the other day and i got to looking at some of the amazing colors,metallic type, and color shifting polishes. when i did i kept thinking that they would look amazing on different ships, and i've never seen this kinds of assortment of shades or finishes in model paint.

then i got to wondering about the difficulty of shooting them through an airbrush and what damage it might cause to said airbrush.(i aint got that kind of cash running around to just try it and see) so i was wondering if anyone has tried to shoot nail polis before?? and if so can you shoot it straight? if thinned with what and what ratio??? or did it do damage to your gun?

i hope that someone has done this and it worked because there is an amazing pearl aqua-marine that has my avenger class model written all over it. oh another question has anyone used powdered makeup for weathering? because they have a much better selection of shades then any of my pastel kits ever have. i.e blushes and eyeliners?? or are they to oily and repel paint and clear coat??

on a + note if this doesn't pan out. my wife has announced that she will never ever take me down any make up isle ever again.
i love it when a plan comes together
http://s1015.photobucket.com/albums/af278/raser13/
User avatar
USS Atlantis
Posts: 2388
Joined: Sat Sep 08, 2007 6:44 pm
Location: Galaxy 217, Orion Arm, Sol System, Sol III, 44° 53' N 93° 13' W (Local coordinate system)
Contact:

Post by USS Atlantis »

I've never done this, so take it with a grain of salt

I know at the very least you'd have to thin the nail-polish to an extreme amount - it's VERY thick compared to enamel paint

Acetone is the thinner of choice there - that's all nail-polish remover is really

If you try this, take all ventilation warnings and double them


The powdered make-up - hmm - I wonder how close to the powdered pastels these would be - probably use the same techniques

And ya - the wife's had me push her down those aisle (she's wheel-chair bound) to check on things, so I know exactly what you're talking about as regards color selection
Atlantis (Ken)

Build Blog
Mad-Modeler
Posts: 1118
Joined: Mon Sep 13, 2010 6:12 pm

Post by Mad-Modeler »

Can be done.

The protege of Max Watanabe does it a lot on her Gundam builds.

There are videos of her builds on Youtube check the 'Plamo Tsukurou', etc vids.
seam-filler
Posts: 3924
Joined: Thu Apr 17, 2003 11:05 am
Location: Aberdeen, Scotland

Post by seam-filler »

^ what they say, but I also found that the acetone attchs the seals in my Badger 150 pretty quick. They're only pennies to replace, but it means a complete strip-down.
"I'd just like to say that building large smooth-skinned models should be avoided at all costs. I now see why people want to stick kit-parts all over their designs as it covers up a lot of problems." - David Sisson
User avatar
Kylwell
Moderator
Posts: 29650
Joined: Sun Nov 02, 2003 9:25 pm
Location: Lakewood, CO
Contact:

Post by Kylwell »

I wold suggest lacquer thinner to thin it. Vaporizing acetone has a list of dangers I don't want to go in to.

It's been ages since I sprayed fingernail polish, I was repaint fishing lures for my Dad, but I do remember using lacquer thinner.
Abolish Alliteration
User avatar
Kylwell
Moderator
Posts: 29650
Joined: Sun Nov 02, 2003 9:25 pm
Location: Lakewood, CO
Contact:

Post by Kylwell »

Huh, it's amazing what one finds when you do independent research instead of relying on what you've been told.

Any guess as to the active ingredient in lacquer thinner? Acetone. While acetone is an irritant and can cause some throat issues it has little other health issues.

The lacquer thinner I use also has Methanol, Toluene, Acetic acid, Hexane, Methyl ethyl ketone, & Ethanol. Some of which are nasty.

So, thin with either, don't spray near open flame and use in a well ventilated area. As USS Atlantis said, it'll need a lot of thinner. Very thick stuff.
Abolish Alliteration
Wug
Posts: 2363
Joined: Sun Sep 05, 2004 8:52 pm
Location: Kentucky

Post by Wug »

User avatar
raser13
Posts: 3515
Joined: Sat Nov 24, 2007 3:55 am
Location: second star to the left and straight on till mourning. other wise known as st. louis,mo

Post by raser13 »

thanks guys for all the info. you've helped out immensely. i think that i'm going to have to buy a cheap car model and some nail polish and have to start experimenting.

and definitely thanks for those write-ups they seemed to answer every thing. there are a lot of colors in the nail isle that i just can't find out here in the boondocks in model paint, so i think this will answer alot of my prayers.
i love it when a plan comes together
http://s1015.photobucket.com/albums/af278/raser13/
User avatar
Lt. Z0mBe
Posts: 7311
Joined: Thu May 29, 2003 1:46 pm
Location: Balltown Kentucky, by God!
Contact:

Post by Lt. Z0mBe »

In these two tutorials on user "TMBountyHunter's" channel, you can see a coughcoughcoughhotcough female Japanese builder shoot nail polish:

http://www.youtube.com/watch?v=qFixV8jwDLA
http://www.youtube.com/watch?v=1D64BCJkiKs

I hope this helps.

Kenny

www.sigmalabsinc.com


Onward, proud eagle, to thee the cloud must yield.
TonyT
Posts: 135
Joined: Tue Jul 20, 2010 9:30 pm

Post by TonyT »

lol many salons use airbrush kits for doing nails and fake tans, these use standard airbrushes and most do them as kits.......... here are Iwatas

http://www.medeabeauty.com/

so if you are looking a little anemic after hours locked away in a darkened room modelling away............ Never fear, run some fake tan through your gun before you pack up and tell the missus you have been doing that gardening you promised to do :P
Post Reply