uk flashing curcuit builder?

nickymaude · Post by **nickymaude** » Wed Apr 25, 2012 12:51 pm

i am doing a amt cutaway tos enterprise, and im half way through, ive successfully replicated the spinning domes effect, i think it looks pretty cool, but now im at the point where i need a flasher curcuit for the nav lights. I have zero knowledge about building flasher ciruits, and very much want to continue with this kit. Is there anyone here in uk that could build me a nav circuit, i need one red, one green and two white all flashing at the same rate, and i need it at about 12 volts, or could someone please direct me to a site that does them, (if one exists), i would greatly appreciate anyones help with this, thank you.

Matt1982 · Post by **Matt1982** » Wed Apr 25, 2012 6:11 pm

Build your own! It's easy and fun!

But they cost $30-$50 if you buy a pre-made by madman lighting. Or $10-$20 if you make it yourself.

Glorfindel · Post by **Glorfindel** » Thu Apr 26, 2012 7:57 pm

nickymaude....second circuit from the bottom. $15.25. Check out the other lighting effects too (they have Nav. lights) pre-made and all affordable.
http://www.ngineering.com/lighting%20ef ... hicles.htm

Sloucher · Post by **Sloucher** » Fri Apr 27, 2012 6:20 am

Hi nickymaude

I can do a navigation flasher circuit which will flash the red and green leds at any rate you choose and also flash white leds (which I assume you want to represent the strobe marker lights?). The white leds can flash at a different rate to the red/green leds if required.

Its the lower (green) circuit board here:
http://wiredfx.co.uk/blog/mk3-effects-kit-now-available

Cost would be around £6 if you wanted the leds wired directly to the board, it may be a smidgin more if you wanted the molex connectors I've used in that example on the website.

PM me if you're interested.

Bernie