Ugh... Ooops... advice?

drewid142 · Post by **drewid142** » Mon Aug 06, 2012 10:27 pm

OK... I broke the cardinal rule and got totally dinged for it...

Working on objet masters... thoroghly cleaned.. I hit them with Tamiya Suurface primer and sanded a few times... then... here's where I think I goofed... I hit it with Testors Gloss Coat Grey... just trying to give it a nice shiney suurface... that was 10 days ago and the parts are still sticky.

Advice? Soaking to remove the paint?

Thanks in advance for chiming in!

Drew
Crow's nest Models

Johnnycrash · Post by **Johnnycrash** » Mon Aug 06, 2012 10:46 pm

Easy Off Oven Cleaner. A quick spritz, let sit 20 minutes, lightly scrub with old toothbrush (or your sister's) under warm running water. Rinse, repeat as needed. Good for removing paint from ALL materials. Will not harm plastic or even clear parts.

drewid142 · Post by **drewid142** » Tue Aug 07, 2012 11:02 pm

Will Do! Thanks!

no, really... thanks!

cHEERS
dREW

drewid142 · Post by **drewid142** » Mon Aug 13, 2012 8:48 pm

YEAH! THAT WORKED GREAT!

Thanks fopr the helpful advice, Mr. Crash

Drew

HWR MKII · Post by **HWR MKII** » Mon Aug 13, 2012 9:05 pm

Next time dont use testors products.

drewid142 · Post by **drewid142** » Tue Aug 14, 2012 2:11 pm

funny... I grabbed the good primer for working on my masters... but only needed to gloss coat thes three little bits... so I made a quick mistake... going with cheaper can of gloss for such a small job...

OOOOOPS

lesson learned.

Drew

Ziz · Post by **Ziz** » Tue Aug 14, 2012 4:14 pm

I use Walmart's own brand of gray primer - ColorSmart, I think. It sells out fast every time it comes in though so you may have to check back a few times before you figure out their shipping schedule.