I'm doing a bit of custom work on the lighting system for my 1:350 TOS Enterprise and I'm replacing the lighting strips for the nacelle grilles with an LED light tube. The thing works by pointing two LEDs into the ends of a plastic tube to disperse the light evenly along the length of the tube. I'll be adding a couple more LEDs in the fronts of each grille for more light.
Thing is, I need to know what the value for the resistor on the strip is. It is SMT, and has the number 131 on it.
Resistor value on the 1:350 TOS Enterprise lighting kit?
Moderators: Sparky, Moderators
-
MillenniumFalsehood
- Posts: 17038
- Joined: Tue Nov 16, 2004 5:23 pm
- Location: Wichita, KS, USA
- Contact:
Resistor value on the 1:350 TOS Enterprise lighting kit?
If a redhead works at a bakery, does that make him a gingerbread man?
Ponies defeat a Star Trek villain? Give them a Star Wars award ceremony!
Ponies defeat a Star Trek villain? Give them a Star Wars award ceremony!
That should work out to be 130 ohms.
This is a good site for working out SMD codes:
http://www.hobby-hour.com/electronics/smdcalc.php
HTH
Bernie
This is a good site for working out SMD codes:
http://www.hobby-hour.com/electronics/smdcalc.php
HTH
Bernie
WiredFX
Small Lighting and Effects UK
Small Lighting and Effects UK