Cheap LED strand at Dollar Tree
Moderators: Sparky, Moderators
- SpaceRanger1
- Posts: 890
- Joined: Mon Oct 20, 2008 4:56 pm
- Location: Carrollton, Texas
Cheap LED strand at Dollar Tree
Get thee to thy nearest Dollar Tree and look for "Red Cup Party Lights." Each package contains 5 warm white 4-mm LEDs wired to a 2-AAA battery holder w/on-off switch. Each LED is inside a small red plastic cup which serves as a reflector, but the cups are easily removed. Only one US dollar per set!
Michael McMurtrey
IPMS-USA #1746
IPMS-Canada #1426
Carrollton, TX
"Yup, exactly what SpaceRanger1 is saying. 100%" — seashark
IPMS-USA #1746
IPMS-Canada #1426
Carrollton, TX
"Yup, exactly what SpaceRanger1 is saying. 100%" — seashark
-
- Posts: 279
- Joined: Thu Jan 12, 2006 7:06 pm
- Location: York, Pennsylvania
I went there today and did not find the red cup lights.
Instead, I found an even better bargain!
From a company called "Garden Collection" I found a string of 10 LEDs attached to a 2 AA battery clip labeled as "10 LED Colored Flower Lights". Instead of red Solo type cups, little, soft poly-vinyl "flowers" are attached, decorative elements that slide right off with just a gentle bit of tugging. The "bulbs" are not that bright and give a bit of a blue-white glow, but for a single buck, that's not a bad deal.
The store also had dozens of "tea lights" packaged in sets of 2 for just a buck. I "think" the LEDs are the self contained "flickering" variety (as opposed to being controlled by an external circuit. I bought a set just to see how they worked. The little "base" contains a CR2032 "coin" type battery, so it's a deal just for that. If they are the kind with the circuit housed in the acrylic lens, they can be extracted and wired inside a model or diorama where one might need an "earthy" unsteady light.
They are from a company called "Luminessence" THe battery are rated for roughly 120 hours of accumulated use. The LEDs do seem to be enbeeded within a candle flame shaped casting of firm poly-vinyl. They may prove a tougher challenge to extract without damage.
Sincerely,
Bill
Instead, I found an even better bargain!
From a company called "Garden Collection" I found a string of 10 LEDs attached to a 2 AA battery clip labeled as "10 LED Colored Flower Lights". Instead of red Solo type cups, little, soft poly-vinyl "flowers" are attached, decorative elements that slide right off with just a gentle bit of tugging. The "bulbs" are not that bright and give a bit of a blue-white glow, but for a single buck, that's not a bad deal.
The store also had dozens of "tea lights" packaged in sets of 2 for just a buck. I "think" the LEDs are the self contained "flickering" variety (as opposed to being controlled by an external circuit. I bought a set just to see how they worked. The little "base" contains a CR2032 "coin" type battery, so it's a deal just for that. If they are the kind with the circuit housed in the acrylic lens, they can be extracted and wired inside a model or diorama where one might need an "earthy" unsteady light.
They are from a company called "Luminessence" THe battery are rated for roughly 120 hours of accumulated use. The LEDs do seem to be enbeeded within a candle flame shaped casting of firm poly-vinyl. They may prove a tougher challenge to extract without damage.
Sincerely,
Bill
Tempt the Hand of Fate and it'll give you the "finger"!