Taking off chrome?

Got a question about techniques, materials or other aspects of physically building a model? This is the place to ask.

Moderators: DasPhule, Moderators

Post Reply
User avatar
Maritain
Posts: 1426
Joined: Fri Jun 11, 2004 8:45 pm
Location: Mid-West

Taking off chrome?

Post by Maritain »

Hello,

I was think of picking up a P.L. Jupiter II, at the local hobbystore, they still have one and its chrome. If I use Polly Easyoff paint remover will that work, I seem to remember someone using coke? Any thoughts or imput would be appreciated.

Thanks.
Do not be so open-minded that your brains fall out.
User avatar
onezero
Site Admin
Posts: 17159
Joined: Thu Jul 11, 2002 4:58 pm
Location: In my living room watching - but I am not laughing.
Contact:

Post by onezero »

It should. So will bleach, Pine-Sol or Simple Green
<*>
j
john lester
Starship Modeler

A hyphenated word and a non-hyphenated word walk into a bar and the bartender nearly chokes on the irony.
User avatar
Jonas Calhoun
Posts: 1919
Joined: Sun Nov 16, 2003 6:12 pm
Location: The Hunting Grounds.

Post by Jonas Calhoun »

I've also had good luck with Mr. Clean.

Dan
"Laugh while you can, monkey boy!" -- Lord John Whorfin
User avatar
rallymodeller
Posts: 3776
Joined: Mon Mar 17, 2003 8:06 pm
Location: Cornering at over 1g

Post by rallymodeller »

Castrol Super-Clean seems to be the favoured stuff of the automodeling crowd. You can also use Easy-Off if either a) the chrome is too thick; and/or b) you are really fast.
--Jeremy

"I'm not a geek, I'm a specialist." -- Sgt. Sousuke Sagara, Full Metal Panic
Saturn
Posts: 6716
Joined: Sat Jul 13, 2002 9:06 pm
Location: Oklahoma City, OK

Post by Saturn »

If it's plated like the Polar Lights BTTF Delorean, nothing will chemically remove that plating. You'll have to sand it off. (I don't have the J2- I just remember my stripping agony with the Delorean)

Super Clean is what I use for stripping paint and most model-kit plated chrome.
"Of all the chili that I've eaten in my travels, this has the most.......Cumin."
Digger1

Post by Digger1 »

Coke - the soft drink
User avatar
admiralcag
Posts: 975
Joined: Fri Jun 20, 2003 6:46 am
Location: Arvada, CO

Post by admiralcag »

Vinegar. Cheap and environmentally friendly. Takes a couple of days, though.

Vern
User avatar
MillenniumFalsehood
Posts: 17033
Joined: Tue Nov 16, 2004 5:23 pm
Location: Wichita, KS, USA
Contact:

Post by MillenniumFalsehood »

Another thing that might take it off is brake fluid, but you have to thin it or else it'll dissolve the plastic. I've tried it with pre-painted kits and it took regular paint off plus the chrome, but since the chrome of the J2 isn't taken off by normal chemical means, I don't know if the brake fluid will take it off or not. :?
If a redhead works at a bakery, does that make him a gingerbread man?

Ponies defeat a Star Trek villain? Give them a Star Wars award ceremony!
fubar
Posts: 63
Joined: Fri Dec 23, 2005 2:13 pm
Location: Sourthern Indiana

Post by fubar »

I`ve had plenty of luck using Automatic dishwasher detergent.The gel type.Just put the parts in a ziplock bag,load it up and the next morning most if not all the chrome will have disolved.
I don`t care if its not broke,fix it anyway.
Post Reply