Removing acrylic that is overtop lacquer

This is the place to get answers about painting, weathering and other aspects of finishing a model.

Moderators: DasPhule, Moderators

Post Reply
vlester
Posts: 230
Joined: Mon Apr 16, 2007 3:29 pm
Location: Madison, WI

Removing acrylic that is overtop lacquer

Post by vlester »

Ok I didn't see anything like this posted so here goes...

I have a kit sprayed with a red lacquer, over that I was painting grey detail but some of the grey ran under the masking and now I have over run on some of the red.

Is there a safe way to remove the grey acrylic without damaging the red lacquer underneath?
User avatar
DasPhule
Moderator
Posts: 3593
Joined: Thu Jul 11, 2002 5:31 pm
Location: Tampa, FL
Contact:

Post by DasPhule »

Carefully scrape it off with a knife? Other than that, I don't know. Kinda hard to strip one color and not the other once dry.

Erin
<*>
How about a nice cup of STFU?
http://www.fpkclub.com/ugh-models
DocTor
Posts: 820
Joined: Wed Jul 17, 2002 8:33 am
Location: Toronto
Contact:

Post by DocTor »

Try some Windex on a Q-tip.
irishtrek
Posts: 5764
Joined: Fri Sep 16, 2005 2:04 am
Location: wouldn't you like to know

Post by irishtrek »

Rubbing alchohol and q-tips should remove at least part if not most of it.
Normal?? What is normal??
vlester
Posts: 230
Joined: Mon Apr 16, 2007 3:29 pm
Location: Madison, WI

Post by vlester »

I was kind of thinking that might work but wasn't sure if it would work once its dry...will try tonight.

Thanks!
User avatar
Dukat, S.G.
Posts: 3111
Joined: Fri Jul 12, 2002 4:39 pm
Location: Cardassia Prime

Post by Dukat, S.G. »

Oh, yeah -- isopropyl or Windex'll eat up dry acrylics. Don't worry ;) It might take a little patience, but you'll get there :)
"Cardassians do like to talk. I suppose
it can be a failing, at times."-- Dukat

(My real name's Sean Robertson. Don't let the scales and alter-ego fool you ;D.)
vlester
Posts: 230
Joined: Mon Apr 16, 2007 3:29 pm
Location: Madison, WI

Post by vlester »

Well I tried the isopropyl, it ate through the lacquer before it did the acryl, the windex doesn't seem to be doing anything to either, do I need to let the windex sit on it?
User avatar
Dukat, S.G.
Posts: 3111
Joined: Fri Jul 12, 2002 4:39 pm
Location: Cardassia Prime

Post by Dukat, S.G. »

vlester wrote:Well I tried the isopropyl, it ate through the lacquer before it did the acryl, the windex doesn't seem to be doing anything to either, do I need to let the windex sit on it?
Dang. Sorry to hear the alcohol cut into the lacquer.

Windex does need to dwell on acrylics for awhile, at least in my experience.
"Cardassians do like to talk. I suppose
it can be a failing, at times."-- Dukat

(My real name's Sean Robertson. Don't let the scales and alter-ego fool you ;D.)
irishtrek
Posts: 5764
Joined: Fri Sep 16, 2005 2:04 am
Location: wouldn't you like to know

Post by irishtrek »

Have tried letting the part sit in the windex or rubbing alcohol for a few hours?
Normal?? What is normal??
vlester
Posts: 230
Joined: Mon Apr 16, 2007 3:29 pm
Location: Madison, WI

Post by vlester »

Dukat, S.G. wrote:
vlester wrote:Well I tried the isopropyl, it ate through the lacquer before it did the acryl, the windex doesn't seem to be doing anything to either, do I need to let the windex sit on it?
Dang. Sorry to hear the alcohol cut into the lacquer.

Windex does need to dwell on acrylics for awhile, at least in my experience.
All's good, it was a small area and it just looks "weathered" anyway hehe.

I'll try leaving the windex on it for a bit longer tonight. I may just end up doing some spot touchup with the red, it really doesn't look to bad.
Post Reply