Model Expo airbrush booth

Devin · Post by **Devin** » Sun Dec 13, 2009 5:40 pm

Does anyone have experience or seen any reviews of the new Model Expo booth shown here?

http://www.modelexpo-online.com/product ... MNO=HSE420

While I built my own booth in the past and it continues to work beautifully, this one looks like a good, smaller, cold-weather (no venting outside) piece of equipment. I'm curious how it works, if the filters are good enough for lacquer (I loves me some Mr. Surfacer!) and any other info on it.

Thanks.

-Devin

kenlilly106 · Post by **kenlilly106** » Sun Dec 13, 2009 5:56 pm

It looks like the filters are the standard furnace filter type for particulates only, I don't see anything in the description about it having activated carbon or charcoal filters for solvent removal, so I'd say it can't handle them.

Ken

Kylwell · Post by **Kylwell** » Mon Dec 14, 2009 11:57 am

100cfm and not much more than $100, looks pretty good. I'd look into the activated charcoal filters, might be able to wedge them in.

Jonas Calhoun · Post by **Jonas Calhoun** » Tue Dec 15, 2009 12:19 pm

It's gotta have an exhaust somewhere, doesn't it? Feed that into a 5 gallon bucket with charcoal filters stuffed inside and exhaust holes cut into it...

Dan