Does easy-off harm clear parts?

Jubal · Post by **Jubal** » Tue Jul 05, 2005 7:31 pm

I want to strip the paint off a model that has some clear parts. I'v heard Easy-off works, but I'm wondering if it damages clear plastic (Clouding, etc.).
Thanks for any input you can give me.

-Jubal

Johnnycrash · Post by **Johnnycrash** » Tue Jul 05, 2005 8:26 pm

I have used, and I swear by, Easy Off. I have never had a problem with it on clear parts. But it is always a good idea to test it, if you can.

Digger1 · Post by **Digger1** » Tue Jul 05, 2005 9:35 pm

When in doubt, spray the tree/sprue and see what happens.

If the paint in question is acrylic, use alcohol.

Jubal · Post by **Jubal** » Wed Jul 06, 2005 4:55 pm

Thanks. Between the PL nx-01 and refit, I should have plenty of clear sprue to test!

-Jubal

scanam2005 · Post by **scanam2005** » Thu Jul 14, 2005 6:24 am

An alternative to Easy-Off is model airplane fuel. The fuel strips off paint easier and is less abrasive. Just make sure to use it in a well ventillated space.

Sci Fi Smoker · Post by **Sci Fi Smoker** » Thu Jul 14, 2005 4:53 pm

I swear by Castrol Super Clean Degreaser. IMO, better than Easy Off and no nasty fumes. Castrol is super friendly to clear parts, too.

Bomech1 · Post by **Bomech1** » Mon Aug 08, 2005 6:32 pm

Just tried some easy-off on an old sabre jet with about 8 coats of paint, worked great. I used an old baking tray to hold the parts. you know the cheap ones made out of aluminum. The easy-off ate the tray but the model is okie-dokie

Brian