Cleaning up uncured silicone- Goof Off

Got a question about techniques, materials or other aspects of physically building a model? This is the place to ask.

Moderators: DasPhule, Moderators

Post Reply
User avatar
davehal9000
Posts: 1800
Joined: Fri Nov 08, 2002 1:29 pm
Location: Festvs Mo

Cleaning up uncured silicone- Goof Off

Post by davehal9000 »

For larger silicone pour projects I've got a set of plastic bowls I use. The only problem is getting the bowls clean afterwards. I use MicroMark 1:1. Anyway tonight I decided to try Goo Off, a product I picked up at Home Depot, and it worked great! Cleaned the white a blue goo right out of the bowls!
Last edited by davehal9000 on Thu Apr 05, 2007 6:09 pm, edited 1 time in total.
Warned you we did, but listen you did not! Now screwed we all will be!

Yoda,
The Lost Hope

What the hell is an Aluminum Falcon????

"Just because you don't like something doesn't mean no one else should get to have it."

Penn Jillette
Top
User avatar
Dr. Yo
Posts: 15174
Joined: Sun Jan 04, 2004 5:45 pm
Location: Craig York,Austin, Texas, Mars

Post by Dr. Yo »

Gets my vote for tip of the year-uncured silcon is a right pain.
Thanks!
"Semper fiendish"-Wen Yo
Top
TREKKRIFFIC
Posts: 3204
Joined: Wed Feb 02, 2005 7:37 pm
Location: Fremont, CA (near Milpitas north of Golfland USA)
Contact:
Contact TREKKRIFFIC

Post by TREKKRIFFIC »

Okay. Stupid question maybe but couldn't you just wait for the silicone to dry and just roll it off ?
"Well--we'll be safe for now--thank goodness we're in a bowling alley--"
Top
User avatar
davehal9000
Posts: 1800
Joined: Fri Nov 08, 2002 1:29 pm
Location: Festvs Mo

Post by davehal9000 »

It's a two part mixture, measured in separate containers and mixed in a third. The third container is easy. Just roll it out. It takes a nuke to clean the other two...
Warned you we did, but listen you did not! Now screwed we all will be!

Yoda,
The Lost Hope

What the hell is an Aluminum Falcon????

"Just because you don't like something doesn't mean no one else should get to have it."

Penn Jillette
Top
TREKKRIFFIC
Posts: 3204
Joined: Wed Feb 02, 2005 7:37 pm
Location: Fremont, CA (near Milpitas north of Golfland USA)
Contact:
Contact TREKKRIFFIC

Post by TREKKRIFFIC »

davehal9000 wrote:It's a two part mixture, measured in separate containers and mixed in a third. The third container is easy. Just roll it out. It takes a nuke to clean the other two...
Ahhhhh... I see....
"Well--we'll be safe for now--thank goodness we're in a bowling alley--"
Top
DX-SFX
Posts: 2289
Joined: Fri Jan 03, 2003 10:33 am

Post by DX-SFX »

Ordinary White Spirit/Turps will wash off uncured silicone. You can use it to clean your brushes too if you use a brush to add the first layer of rubber.
Top
User avatar
karim
Posts: 4255
Joined: Fri Jul 12, 2002 4:51 pm
Location: NC
Contact:
Contact karim

Re: Cleaning up uncured silicone- Goo Off

Post by karim »

davehal9000 wrote:For larger silicone pour projects I've got a set of plastic bowls I use. The only problem is getting the bowls clean afterwards. I use MicroMark 1:1. Anyway tonight I decided to try Goo Off, a product I picked up at Home Depot, and it worked great! Cleaned the white a blue goo right out of the bowls!
Is that "Goo Off" (a product I've never heard of before)

or "Goof Off" (a paint/chemical remover) ?
Top
User avatar
davehal9000
Posts: 1800
Joined: Fri Nov 08, 2002 1:29 pm
Location: Festvs Mo

Post by davehal9000 »

Goof Off. My Goof...
Warned you we did, but listen you did not! Now screwed we all will be!

Yoda,
The Lost Hope

What the hell is an Aluminum Falcon????

"Just because you don't like something doesn't mean no one else should get to have it."

Penn Jillette
Top
Post Reply

Return to “Construction”