what clear coat to use?

This is the place to get answers about painting, weathering and other aspects of finishing a model.

Moderators: DasPhule, Moderators

Post Reply
User avatar
cylon75
Posts: 1483
Joined: Thu Jul 19, 2007 6:49 pm
Location: norwich ct

what clear coat to use?

Post by cylon75 »

I sprayed a krylon clear over my model and it wrinkled the decals what should I use that wont do that -[I do not have an air brush.]
Not all cylons are bad ,only the damaged ones
Top
User avatar
TER-OR
Site Admin
Posts: 10531
Joined: Thu Jul 11, 2002 7:05 pm
Location: Conjugate imprecision of time negates absolute determination of location.
Contact:
Contact TER-OR

Post by TER-OR »

First thing, use a clean soft brush or Q-tip and put a very thin layer of Future over the decal. Do it twice if you want. Then, apply very thin layers of your rattlecan clear coat. Let the Future cure overnight just to be sure. You shouldn't really need to, but better safe than sorry.
Raised by wolves, tamed by nuns, padded for your protection.

Terry Miesle
Never trust anyone who says they don't have a hobby.
Quando Omni Flunkus Moratati
Top
Post Reply

Return to “Finishing”